Wilckens mold protection paint film protection 2.5 L

Item number: 13440015080
Manufacturer: Wilckens Farben

€13.99

(Base price: €5.60/liter) incl. tax + shipping**

ready for shipping 3 - 5 working days

Mold protection paint 2.5 L for indoor wet rooms from Wilckens

➤Use biocidal products carefully. Always read the label and product information before use.

Ready-to-use, high-yield emulsion paint with mold protection for indoor damp rooms from Wilckens. The paint is capable of water vapor diffusion and contains a film protection with fungicidal properties against the formation of mold. The color is easy to work with, has good coverage and is highly diffusible. For renovation painting on mold-infested interior surfaces as well as for preventive new painting in rooms with inadequate ventilation, such as: B. bathrooms and basement rooms, the color is particularly suitable. Interior plaster, concrete, sand-lime brick, woodchip, paper and non-woven wallpaper as well as expansion panels made of plasterboard, hardboard, pressboard or hard foam are intended as the substrate.

Processing:

The substrate must be dry and clean and be sustainable. First, the mold or fungus infestation should be completely removed. If the surface is highly absorbent or sandy, pre-treatment with a deep primer is required. A primer can be applied diluted with up to 5% water. Then apply 1-2 undiluted top coats. The anti-mould paint can be tinted with up to 5% solid and tinting paint. Please note that this paint may only be applied with a roller or brush and should not be sprayed on.

Consumption:

approx. 6 m²/liter | Sufficient for approx. 15 m²

Attention/safety instructions:

Dangerous respiratory droplets can be formed when spraying. Do not inhale aerosol or mist. Harmful to aquatic organisms with long-term effects. May cause an allergic skin reaction.

Colour: white

Content: 2.5 liters (enough for approx. 15 m²)

Yield: approx. 6 m²/liter, for a coat on a smooth surface

Drying time: approx. 4 - 6 hours (depending on room temperature, humidity and absorbency of the surface)

Properties: high coverage, water vapor diffusible, long-term protection against mold, wet abrasion resistance class 2 according to DIN EN 13300, water-thinnable (max. 5%), tintable (with a maximum of 5% solid and tinting color)