Dr. Schutz Design Floor Care Set 3-piece with PU Cleaner and Floor mat

Name: Dr. Schutz Design Floor Care Set Refreshing
Brand: Dr. Schutz
SKU: 78015753
Price: 18.81 EUR
Availability: InStock

The design floor care set from Dr. Schutz is ideal for cleaning and maintaining your resilient floors. It contains a PU Cleaner 750 ml for regular cleaning or also preceding final cleaning and a Floor mat 750 ml for the care and refreshment of worn floors. The enclosed white hand pad can be used for effective removal of heel marks. With the enclosed cleaning and care instructions you can learn more about the professional application of vinyl floor care.

PU Cleaner:

The PU Cleaner from Dr. Schutz is a cleaning concentrate for the maintenance cleaning and final cleaning of water-resistant design and hard floors. The concentrate can also be used for factory-finished PU / PUR floor coverings made of vinyl, PVC, linoleum or rubber. Due to its high cleaning power, dirt and grease are reliably removed from the floor and the cleaner also ensures streak-free and non-slip surfaces without leaving a grey film. The excellent dirt binding and removal of loose dust and dirt also increases the longevity of your floor coverings. In ongoing maintenance cleaning, the cleaner is efficient and very economical. The PU cleaner is suitable for both manual and machine application. The cleaner contains biodegradable ingredients and renewable raw materials and is also pH-neutral.

Coarse dirt should be removed before use. Sensitive surfaces such as wood or metal should not come into contact with the cleaning solution.

Application:

Cleaning after installation: First, the coarse dirt must be removed by sweeping or vacuuming. Depending on the degree of soiling of the surface, you can dilute the cleaner: for heavy soiling in a ratio of 1:10, for lighter soiling you can adjust the mixing ratio accordingly and reduce the proportion of cleaner. Then apply the cleaning solution to the floor covering and let it work for a short time before you start scrubbing. For larger areas, it is advisable to use a single-disc machine with a suitable pad or brush. Finally, remove the dirt with appropriate equipment such as an absorbent wide mop or a spray vacuum cleaner and wipe up with clear water until the cleaning solution has neutralised.
Daily cleaning: Dilute the cleaner in a ratio of 1:200 with water and wipe the surface to be treated with this solution. When using in automatic cleaning machines, the dilution can be increased to 1:400

Hints:

Do not wet sensitive surfaces (e.g. wood, metal) with the cleaning agent
Store in a cool and dry place
Store under lock and key and out of reach of children

Consumption:

Final building cleaning: approx. 2 litres per 100 m².
Maintenance cleaning: approx. 0.1 litres per 100 m²
Range: up to 750 m²

Floor mat:

The polyurethane-containing polymer dispersion is perfect for the care and maintenance cleaning of resilient floor coverings in the household, if the use of a hard sealer or a PU sealer is not possible. Due to the special polymer combination, the care is also suitable for quickly refreshing PU-finished floors. The floor is protected by an elastic, slip-resistant, matt care film. Dirt adhesion is reduced and maintenance cleaning is made easier.

Before use, the full care matt should be shaken well.

Application:

Initial Protection: For initial care, apply undiluted Floor Mat with a suitable squeegee thinly and evenly to the surface after it has been thoroughly cleaned. If this first film is resistant to foot traffic, a second film is applied transversely to it - in the case of heavily used surfaces, it may be necessary to apply a third film (then again longitudinally). The surface should then be allowed to dry for at least 12 hours. For refreshing PU-finished coverings, the respective surface should be thoroughly cleaned with Basic Cleaner R or PU Cleaner before applying the full care. The use of a white pad is recommended.
Routine Cleaning: Dilute the Floor Mat with water in a ratio of 1:100 to 1:200 and clean the floor with this solution by wet mopping. This procedure is sufficient to remove light soiling.

Notes:

Turn off the underfloor heating before application
When applying undiluted, avoid strong sunlight and draughts
In the case of porous older linoleum coverings that have been leached out by the use of strongly alkaline cleaning products, the coating may powder off in individual cases
Protect from frost

Consumption:

Initial care and refreshing: 25-35 g/m²
Maintenance cleaning: 0.2 l/100 m²

Dr.Schutz Design Floor Care Set - Can be used on all types of vinyl and resilient flooring, such as PVC & LVT, linoleum, and rubber floors. Especially suited to Luxury Vinyl Tiles (LVT) and Design floors
Clean & Protect - Contains PU-Cleaner 750 ml, Floor mat 750 ml, White Pad and cleaning & care instructions
Easy to use - PU-Cleaner: remove coarse dirt, dilute cleaner accordingly, apply to the surface, leave to soak in, scrub, absorb dirt liquor and wipe down with clear water; Floor mat: shake well, dilute accordingly, apply evenly to the surface, let it dry
Efficient and high-yield - PU-Cleaner: up to 750 m²; Floor mat: up to 750 m²
Maintain the longevity of your floors - Can be used for initial cleaning or routine cleaning