The roof and base paint from Pufas in a 5l container is a high-coverage plastic dispersion paint that is suitable for permanent weather protection. It can be used to coat roof tiles, fiber cement roofs* (e.g. Eternit), plaster, concrete, masonry and similar mineral substrates. In addition, the color is open to water diffusion, scrubbing and UV-resistant. You can also dilute them with water, apply them using the airless method, or mix them with one another or with white facade paint. The color results in a matt coating surface in which the subsurface structure is retained.
Tip: You will also find suitable accessories for this product in our shop!
Make sure that the surface is dry, clean, stable and free from separating agents (dust, grease, etc.). Also remove poorly adhering paint and loose parts. In the event of algae and moss infestation, pretreat the surface.
Processing as a roof paint: Pretreat the surface to be painted with deep primer. After the primer has dried, apply the paint. This should only be processed in full color when coating roofs.
Use as base paint: The base should be adequately protected from moisture. If the substrate is highly absorbent or sanding, pretreat with Tiefgrund
Processing and coating structure: Stir the paint before use. Then apply with a suitable roller, brush or airless method. For a base coat, the paint can be diluted with approx. 5% water. After the first coat, the paint can be applied undiluted in 1 - 2 layers as required. The colors can be mixed with each other and with white facade paint. Clean the tools with water immediately after use.
For one coat, depending on the substrate, the drying time is (at 20°C, 65% relative humidity): 12-24 hours
Lower temperatures and higher humidity increase the drying time!
Danger/Caution: Store closed containers in a cool but frost-free place - surface and ambient temperature not below + 5 °C and do not use in strong sunlight - keep out of the reach of children - medical advice is required, Have packaging or label ready - avoid eating, drinking or smoking while using the paint - observe the usual protective measures even when processing low-emission paints - rinse off immediately with plenty of water in the event of contact with the skin and eyes - do not pour into the sewage system or bodies of water or soil - do not inhale spray mist - use combination filter A2/P2 for spraying work, dust filter P2 for grinding work - only recycle completely empty containers, dried material residues can be disposed of as household waste, liquid material residues can be handed in at the collection point for old paintwork < /p>
Safety data sheets can be found under Info-Download.
