Meyer stripper SB Forte water-emulsifiable paint stripper 750 ml
The Meyer stripper quickly and thoroughly removes old paintwork based on oil, cellulose, synthetic resin, asphalt, chlorinated rubber, synthetic resin dispersion and latex paints. No discoloration occurs when using this product on natural woods. Exotic woods should be checked in an invisible place before stripping.
Danger/Caution: Stripper: Flammable liquid and vapour. Repeated contact can lead to brittle or cracked skin. May cause drowsiness and dizziness. If medical advice is required, have the packaging or identification label ready. Keep out of the reach of children. Read the label before use. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Keep container tightly closed. Do not inhale vapour. Use only outdoors or in well-ventilated areas. . Wear protective gloves / protective clothing / eye protection / face protection. IN CONTACT WITH SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water or take a shower. IF INHALED: Move person to fresh air and allow unrestricted breathing. If you feel unwell, call a POISON CENTER / doctor. If eye irritation persists: Seek medical advice / seek medical attention. In case of fire: Use CO2, extinguishing powder or water spray to extinguish. Store in a well-ventilated place. Keep cool. Dispose of the contents / container in accordance with local regulations.
Meyer Stripper SB Forte Pastös
Preparatory work: Due to its high dissolving power, ABBEIZER SB FORTE can also swell plastics and synthetic fibres. Therefore it is advisable to cover the surrounding area.
Application: Apply ABBEIZER SB Forte generously and leave to take effect. The objects to be stripped can also be placed in an immersion bath. After the reaction time, remove the swollen paint film with a spatula. Wash off residues with water and a brush or sponge. For larger areas, a steam jet or high pressure device can be used.
Mixing: ABBEIZER SB Forte is used in the condition as delivered.
Application time: Normally, the application time is approx. 15-45 minutes. For critical paint layers, up to several hours.