Wilckens wood preservative glaze ideally protects your wood products from external influences. Due to its excellent material properties, this glaze is an ideal and water-repellent, weather-resistant protective coating for deciduous and coniferous woods in all outdoor areas. Furthermore, the wood protection glaze is easy to apply, does not flake and is breathable. Furthermore, in combination with Wilckens wood primers, it effectively prevents blue stain and mildew and also offers long-term protection against UV rays. The wood glaze has the colour pine and a container size of 750 millilitres.
Danger warnings H317 May cause allergic skin reactions.
Safety Instructions: P101 If medical advice is required, have the packaging or label ready. P102 Keep out of the reach of children. P103 Read label before use. P280 Wear protective gloves and eye/face protection P501.W1 Dispose of contents/container according to national regulations.
Hazard-determining components for labelling: 4-morpholinecarbaldehyde Material safety data sheets can be found under Info-Download.
Note: Glaze brushes, wood primer, turpentine substitute as well as wood protection glaze in other colours and container sizes are available in our shop. Order everything together and save shipping costs! Application technology: Read identification label before use! The surface must be clean, dry, free of grease and oil and load-bearing. Resin-rich and greasy residues should be washed off with universal thinner. Remove loose coatings. Sand intact old coats. Sand off heavily weathered coats down to the healthy wood. Pre-treat raw wood and pressure impregnated wood with wood primer 1 - 2 times depending on absorbency. Then apply at least 2 coats, sides heavily exposed to weathering 3 coats (min. 180 ml/m²) of wood protection glaze in wood grain direction. In the case of oak wood, 3 coats are urgently required to achieve a closed painted surface. Tip: Inspect wood surfaces regularly, repair any damage immediately. If, for ecological reasons, no wood protecting agents should be used, the use of wood protection primer can be dispensed with. The prerequisite for this is that the constructive (structural) wood protection is guaranteed. In any case, shorter renovation intervals or increased infestation by wood-destroying insects and blue stain fungi must be expected. When processing several containers, ensure that the batches are identical!
1. painting on new wood, outside a) Prepare the substrate accordingly b) 2 to 3 coats of wood varnish
2. paint structure a) Prepare the substrate accordingly b) 1 to 2 coats of wood varnish
Clean tools and brushes after use with turpentine substitute.
Wilckens wood protection glaze palisander 5L for outdoor use
Characteristics: very good light resistance, do not mix with other products, open-pored and glazed, deeply penetrating, ventilating, emphasizes the wood grain, water-repellent, weather-resistant, moisture-regulating, especially suitable for the protection of all tropical and native wood species, silk-glossy, solvent-containing, use undiluted.
Read the identification label before use!
Observe the danger and safety instructions in the description.