Highly opaque emulsion paint Super White from Wilckens 5 L

➤Use biocidal products carefully. Always read the label and product information before use.

Wilckens Superwhite is a high-coverage plastic emulsion paint that was developed for indoor use. The wall and ceiling paint has high opacity, is easy to process, is splash-free and can be applied with airless systems. The paint has good adhesion and does not cause any odors during processing or quick drying. This means that the painted rooms can be quickly occupied and used again. It is ideal for stressed indoor wall and ceiling surfaces, such as neutral interior plasters, woodchip, plaster and plasterboard.

Processing instructions: Do not use at temperatures below +8°C . The surface must be solid, clean, dry, free of grease and stable. Allow new plaster to dry for at least 3 weeks. Prime new plaster or concrete surfaces with a solvent-free primer. Also pre-treat highly absorbent or friable, sandy or washed surfaces with a solvent-free primer. Completely remove old unstable and chalky coatings. Stir well before use and apply evenly.

An absorbent surface can be recognized by the fact that it turns dark when it comes into contact with water. First paint corners and edges with a brush or small roller. Paint remaining areas with a larger roller. During work breaks, keep the tools in the paint or tightly wrapped in a plastic bag.

Painting structure:

1. on plaster and concrete, inside

a) Prepare the surface professionally, solidify if necessary

b) Primer with this product diluted with approx. 10% water

c) an undiluted top coat

2. on old coatings or renovation coatings

a) Prepare the surface professionally, solidify if necessary

b) Depending on the surface condition, 1 €“ 2 coats with this product

< p>For a coat depending on the surface, the drying time is(at +20°C, 65% relative humidity):

Dusty dry: after approx. 2 - 4 hours
can be reworked: after approx. 8 hours
dry and resilient: after approx. 3 days

Lower temperatures and Higher humidity lengthens drying times.

Consumption:

approx. 6 m²/liter | Sufficient for approx. 30 m²

Attention/safety instructions:

Contains 1,2-benzisothiazol-3(2H)-one. May cause allergic reactions.

Colour: white, matt
Quantity: 5l
Yield: approx. 6 m²/litre. with one coat, depending on the nature/absorbency of the surface
Application: Indoors
Properties: wet abrasion class 3 according to DIN EN 13300, opacity class 2, highly opaque, solvent-free, TüV mark, tinting possible with solid and tinted colors in any mixing ratio