2in1 Wilckens Radiator Paint Varnish Lacquer white glossy 750 ml
The 2 in 1 Radiator Paint Lacquer / Varnish is a water-dilutable dispersion varnish that combines a primer and a top coating in one product. This paint lacquer is suited for all kinds of hot water radiatiors as well as their pipes. In addition, the product convinces with a high paint-coverage. The Wilckens radiator paint lacquer contains only a small amount of pollutants and solvents. Therefore, the paint is odorless.
Notice: There are additional sizes available.
Processing advise: Please read the product labeling carefully before you use this product and follow the dangers and safety instructions. The substrate has to be clean, dry, free from grease and rust-free as well as load-bearing. Loosely astrand parts and non-load bearing old parts must be removed with a stripper. Sticking old paints must be sanded well (wear dust mask). Stir well before use. In most cases, the Wilckens 2in1 lacquer can be used without a primer (however please be aware of the exceptions stated by the manufacturer and follow the manufacturer's instructions!).
Exeptions On metal (iron, steel): a) Prime with anti-rust primer 2in1 b) 1 intermediate coat and 1-2 top coats with radiator paint 2in1 undiluted On copper pipes: a) Prime with All Primer 3in1 b) 1 intermediate coat and 1-2 top coats with radiator paint 2in1 undiluted
Danger/Caution: Store in a cool, but frost-free place - do not use at temperatures below + 8 °C, do not use at high temperatures (sunlight) - keep out of the reach of children - medical advice is required, have packaging or identification label ready - do not inhale spray and mist - use combination filter A2/P2 for spraying work, use dust filter P2 for grinding work - eat, Avoid drinking and smoking while using the paint - ensure sufficient ventilation during and after application and drying - rinse thoroughly with water immediately in case of contact with eyes or skin - do not allow to enter the sewerage system, water or soil - only give empty containers for recycling, return liquid material residues to the collection point for old paints - the usual protective measures must also be observed when processing low-pollutant paints
Safety data sheets can be found under Info-Download.
Product type: 2 in 1 Radiator Paint Lacquer / Varnish
Colour: white, glossy
Volume: 750 ml / suited for approx. 9 m² (single coating)
Coverage: approx. 12 m²/litre, for one coat, depending on the absorbency of the substrate
Characteristics: heat resistant up to 120 ° C, priming and varnishing, water- dilutable / environmentally friendly, block-tight, very good light fastness, yellowing resistant, easy to process odourless, low-pollutant
Distinctions: certified by "Der Blaue Engel”
The drying time depends on the substrate (at 20°C, 65% rel. humidity):
dust dry/grab dry: approx. 2 hours
workable dry: approx. 8 hours
Lower temperatures and higher humidity increase the drying time! Start the radiator after a drying period of 3 days.