Wilckens synthetic resin-based paint spray high-gloss in various colours 400 ml
The high-gloss paint spray from Wilckens is a high-quality solvent-based alkyd resin paint. It is ideal for painting and repairing objects both indoors and outdoors and also provides good coverage with high filling power. The product is colour, gloss and weather resistant. lightfast and UV-resistant spray paint. It offers an excellent colour gradient for even surfaces. Excellent adhesion to almost all materials. The substrate of the surface to be treated must be clean, dry and free of grease. Loose old coats and rust should be removed first, then sanded and primed. We recommend that you pre-treat plastic parts with Wilckens plastic primer.
Danger/Caution: Extremely flammable aerosol. Container is under pressure: may burst when heated. Causes skin irritation. Causes severe eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause brittle or cracked skin. If medical advice is required, have the container or label ready. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Do not spray against naked flames or other sources of ignition. Do not stand or burn, even after use. Do not inhale aerosol. Protect from sunlight. Do not expose to temperatures above 50 C degrees. Dispose of the contents / container in accordance with local regulations. Formation of explosive mixtures possible without sufficient ventilation. Contains: Acetone, hydrocarbons.
Paint spray in various colours, high gloss
High quality synthetic resin, quick-drying
for outdoor and indoor use, scratch-, shock- and impact-resistant, very good flow
Yield: approx. 2 m2 /400 ml depending on colour shade and hiding power Storage: (+ 10°C - 25°C, relative humidity max. 60%) 10 years when stored properly Store in a dry place. Protect from sunlight or other heat sources. Temperature resistant: up to 80°C gloss level: at 60° measuring angle according to DIN 67530
Drying time: (at 20°C, 50% relative humidity) dust-dry: after approx. 30 minutes. Tack-free: after approx. 4 hours. Dry through: after approx. 24 hours. Recoatable: within 2 hours or only after 24 hours. Lower temperatures and higher air humidity and layer thickness extend the drying time!