Garage Coating Wilckens Floor Paint silver grey 2.5 L
The Wilckens garage floor coating provides a high-quality floor coating for mineral substrates with high abrasion resistance and good resistance to many chemical attacks. The garage floor coating by Wilckens is suited for normal stressed floor surfaces of concrete and screed, e.g. garages, storage and industrial halls, basement rooms and balconies. Furthermore, the Wilckens garage floor coating is water- and weatherproof and has an excellent alkali resistance.
Processing advise: Please read the product labeling carefully before you use this product and follow the dangers and safety instructions. The substrate must be clean, dry, grease-free, load-bearing and absorbent. No ascending moisture may enter the substrate. Remove grease and oil containing impurities with varnish or cold cleaner. Lots and separating substances, e.g. Cement slurries and sintered layers must be mechanically removed. Concrete and screed surfaces must have set a month. Remove non-load bearing old paints with a stripper. In the outdoor area, the substrate of mosses and algae must be freed from high pressure cleaners, then allowed to dry well. Holes and shallow recesses can be leveled and covered with cement, putty or mortar. When processing several packages, pay attention to batch number!
1. Paint build-up on concrete and screed, inside and outside a) Prepare the substrate accordingly b) 1 x priming with 2K adhesion promoter c) 2 - 3 coats with garage floor coating undiluted each after approx. 24 hours
2. Paint build-up on old paint coats or renovation paint coats a) Check old paint for load-bearing capacity b) Prepare the substrate accordingly, stain out defects c) 1 x priming with 2K adhesion promoter d) 1 - 2 coats with garage floor coating undiluted each after approx. 24 hours
Danger/Caution: If medical advice is required, have packaging or identification label ready. Keep out of the reach of children. Read the label before use.
Safety data sheets can be found under Info-Download.
Product type: Garage Paint / Floor Coating
Colour: silver grey / RAL 7001, silk-gloss
Volume: 2,5 L
Coverage: approx. 6 - 7 m²/litre, for one coat, depending on the absorbency of the substrate
Application: indoor and outdoor
Characteristics: water dilutable, alkali-resistant, abrasion-resistant
Distinctions: resistance to UV rays, water- and weatherproof, environmentally friendly
The drying time depends on the substrate (at 20°C, 65% rel. humidity):
dust dry: approx. 2 hours
grab dry: approx. 6 hours
workable dry / passable: approx. 24 hours
hard-dry / fully loadable: approx. 6 days
Lower temperatures and higher humidity increase the drying time!