2in1 Paint Lacquer Wilckens Varnish silk mat 750 ml
The 2 in 1 Paint Varnish by Wilckens is a water-dilutable dispersion varnish that combines a primer and a top coating in one product. The Wilckens paint lacquer contains only a small amount of pollutants and solvents. Therefore, the paint is odorless and can be used for children's toys. After pre-treatment, the lacquer is also suitable for dimensionally stable wooden components, for primed hard PVC, iron and other metals.
Processing advise: Please read the product labeling carefully before you use this product and follow the dangers and safety instructions. The substrate has to be clean, dry, free from grease and rust-free as well as load-bearing. Loose parts and non-load bearing old parts must be removed with a stripper. Sticking old paints must be sanded well (wear dust mask). Stir well before use. In most cases, the Wilckens 2in1 lacquer can be used without a primer (however please be aware of the exceptions stated by the manufacturer and follow the manufacturer's instructions!).
Exeptions On wood: a) For wood with water-soluble, colouring ingredients, always use wood insulating primer, coat knots twice. Pre-treat raw wood outside with wood primer (blue stain protection). b) Intermediate and final coat with coloured lacquer 2in1, undiluted On ferrous metals: a) If higher corrosion protection is required outside, prime 1 x with 2in1 anti-rust primer b) Intermediate and final coat with 2in1 coloured lacquer undiluted On zinc/aluminium: a) Remove the patina and prime with All Primer 3in1 b) Intermediate and final coat with 2in1 coloured lacquer undiluted On hard PVC: a) Sand (wear dust mask) and prime with All Primer 3in1 b) Intermediate and final coat with 2in1 coloured lacquer undiluted
Danger/Caution: If medical advice is required, have packaging or identification label ready. Keep out of the reach of children. Read label before use.
Safety data sheets can be found under Info-Download.
Product type: 2 in 1 Paint Lacquer / Varnish
Colour: see selection, silk-mat
Volume: 750 ml (additional sizes available)
Coverage: approx. 12 m²/litre, for one coat, depending on the absorbency of the substrate
Application: indoor and outdoor
Characteristics: excellent light fastness, easy processing and colour progression, primer and top coating at the same time, water dilutable / environmentally friendly, shock resistance, odourless, low-pollutant, low-solvent
Distinctions: certified by "Der Blaue Engel", certified by DIN EN 71.3 (suitable for children's toys. ), light- and weatherproofed (certified by VOB Teil C DIN 18 363)
The drying time depends on the substrate (at 20°C, 65% rel. humidity):
dust dry/grab dry: approx. 2 hours
workable dry: approx. 4 hours
hard-dry: approx. 4 days
Lower temperatures and higher humidity increase the drying time!