Baufan anti-mildew paint 750 ml dispersion paint against molds
►Biozidprodukte use with care. Always read the label and product information before use.
The solvent-free anti-mould paint offers reliable protection against fungal attack for building materials indoors. Baufan's dispersion paint is particularly recommended for kitchens, bathrooms and other damp rooms, but it can also be used in bedrooms or living rooms to protect against mould. Before doing so, the coarse dirt should be removed from the affected areas by cleaning them with mould remover. The primer can be painted over after approx. 6 - 8 hours, but should be diluted with 10 % water before application. After it has dried completely, the top coat can be applied undiluted. If necessary, the anti-mould paint can be tinted with solid colours and guarantees long-term protection against mould on various wall and ceiling surfaces, including wallpaper. The scrub-resistant interior paint is available in the other sizes 2.5 l, 5 l and 10 l in our shop.
May cause allergic reactions. Keep out of the reach of children. Do not get into the eyes, on the skin or on clothing. IF INGESTION: Seek medical advice/attention immediately. If medical advice is needed, have the packaging or label ready. Avoid release into the environment. Dispose of contents/container to waste disposal according to local/regional/national regulations.
The mixture is classified as non-hazardous according to Regulation (EC) No 1272/2008 [CLP].
Safety data sheets can be found under Info-Download.
All surfaces must be clean, dry, load-bearing, absorbent and free of separating agents. To increase the strength, please use deep primer. Substrates that cannot be consolidated or do not adhere sufficiently must be completely removed. In case of doubt, apply a trial coat. Surfaces already infested with mould must be cleaned with mould remover before the first coat.
Stir the anti-mould paint well and, if necessary, dilute with water up to 10% as a primer. This can be painted over after approx. 6 - 8 hours. The top coat should be applied undiluted after the primer coat has completely dried.
The paint can be applied with a roller, brush, paintbrush, surface brush or spray equipment. For tinting we recommend dispersion full-tone paints.
Tools must be cleaned with clear water immediately after use.
Depending on the substrate, 1l is sufficient for approx. 6m² for a single coat
approx. 6-8 hours
You find suitable favorable painter accessories, as well as mold cleaner, deep ground and tinting paint with us in the assortment. Order everything together and save shipping costs.
Translated with www.DeepL.com/Translator (free version)
Characteristics: Abrasion resistant, high coverage, low emission, solvent-free, water dilutable
Biozidprodukte use with care. Always read the label and product information before use.
Suitable substrates: Wall and ceiling surfaces made of concrete, masonry, gypsum substrate, fibre cement slabs, cement and lime cement plaster, also applicable on wallpaper